Interface simplifies the way you design and analyze electrical systems

Create, model, design integrated electrical one-line diagrams in seconds.

Simulate HVDC response under steady-state and transient conditions

Calculate equivalent circuit model parameters for motors

Perform sag and tension calculations for transmission and distribution lines

Take your greenhouse gas emissions estimations to the next level with advanced accuracy and detail, using real-time data and customizable emission factors for precise carbon footprint assessments.

Create electrical schematics with SEE Electrical in just a few clicks

Model unlimited solar panels individually or in groups to form a solar array

Evaluate transformer inrush current and its impact on the system

ETAP Current Transformer (CT) Sizing and Saturation tool evaluates the saturation level of current transformer and its potential effect on other equipment. This tool is flexible enough to allow the user to analyze either scenarios with User-Defined fault currents or actual results obtained from the ETAP digital twin calculations. CT sizing warnings are also provided to the user considering the effect of the saturation in case of a fault event.

Cable ampacity calculation based on National Electrical Code

A multi-area supervisory control system to regulate generation levels

The ESRI ArcGIS Interface easily converts system models from ESRI ArcGIS to ETAP

Peak load shifting, load start inhibition, Demand Side Management system

Integrated and unified AC & DC network power flow

Model and simulate wind farm operation with grid connection

Element List for Control Systems Elements

Integrated and unified AC & DC network power flow

Intelligent modeling environment to create, configure and manage marine electrical system models.

Design and produce electrical panels by using a virtualized environment to gain a more spatial perspective.

This module provides a comprehensive automation solution for complex electrical systems. It integrates with onsite renewables, enabling users to customize controller logic and lower maintenance costs via remote updates and performance monitoring.

Integrated AC & DC System Load Flow

Organized and efficient management and correlation of crews to Work Orders or Tickets

Add-on for the design of 2D electrical harnesses from schematic diagrams produced by SEE Electrical Expert

A Dedicated Electromagnetic Transients Program (EMT) for simulation and analysis of power system transients.

The Short Circuit module determines fault currents and automatically compares them against manufacturer ratings.

Current carrying capacity calculations for high voltage power cables per IEC 60502

Calculated derated ampacity of overhead lines under various operating conditions

Analyze cold-state starting of generators under normal and emergency conditions

High Voltage Arc Flash Analysis recommended for systems 15 kV and above

Define & analyze component outage and failure scenarios

Cable ampacity calculation based on IEEE recommended practice for industrial and commercial power systems

Increased Productivity with Scripting & Program Automation in Python™

Time Domain Unsymmetrical Unified AC & DC Load Flow

Advanced battery sizing selection and verification software

Fast, accurate design and analysis of ground grids & earthing mats

Add-on for ETAP to determine a renewable power plant’s reactive power capability and compare against grid interconnection requirements. From just one study calculation, generates comprehensive reporting including compliance details and visualizations.

Flexible alarm management with power analysis based alarming, real-time data and field device notifications.

Investigate power quality issue and system resonance problems

Detailed energy consumption and cost analysis based on energy tariffs and power market exchange information.

Perform system-wide protection studies and evaluate the relay performance.

Geospatial tools to better design, analyze, and expand transmission networks and situational awareness

Optimize power system controls and operating conditions based on system objectives and constraints

Analyze impact of unbalanced system open phase fault

FlickerMeter evaluates flicker compliance against emission limits. Flicker calculations comply with IEC 61000-4-15, standard for electromagnetic compatibility.

Intuitive, intelligent, and integrated real-time monitoring via a state-of-the-art interface.

Integrated Short Circuit & Electric Shock Protection Calculations.

Utilize metering information to determine technical & non-technical losses

Model, monitor, and manage railway electrical networks

Save hundreds of work-hours by this efficient new multi-user platform for project execution and management.

Calculate and utilize self and mutual impedances of overhead power lines

Flexible, cloud-based add-on for Caneco for use in LV/PV/HV electrical design and project collaboration of all sizes and complexities.

A compherensive list of AC/DC elements and protection components for modeling electrical power systems.

Optimal network restoration to determine fault isolation and restoration strategy, FLISR

And add-on to generate electrical projects for SEE Electrical Expert and SEE Electrical users

Star™ - An intuitive and logical approach to time-overcurrent protection & selectivity analysis

Simplify modeling & design by importing Revit drawings to ETAP one-line diagram

Confirm the sequence of operation and selectivity of protective devices.

Model, design, and analyze various earthing system configurations

Determine pickup and dropout voltages, power losses, current flows and system violations via time series simulation

Minimize operating cost and improve generation unit life-time

ETAP provides an integrated tool which allows for faster and easier determination of arc energy and PPE selection evaluation. Additionally, generation of deliverables is a key feature available for the labeling of the equipment in the field.

Current carrying capacity calculations for power cables in ships & offshore units

Model, monitor, and manage electrical networks

Conversion tools to import from legacy power system software

Bidirectional data synchronization between ETAP and Intergraph’s SmartPlant Electrical (SPEL)

An CAD add-on for designing electrical installations on building plans

Automated outage prediction across your distribution system

Analyze the availability and cost of distribution systems

Power flow analysis and voltage drop calculations software with accurate and reliable results

Enables the simulation of critical events and contingencies against current operating conditions and presents contingency responses. Spots scenarios that could affect electrical system stability and equipment that may trigger alerts.

Validate load shedding logic schemes via simulation prior to field deployment

Visualize, analyze & modify geospatial electrical models and simulation results

The integration of Battery Energy Storage Systems (BESS) improves system reliability and performance.

Transformer sizing based on altitude, temperature, insulation, number of phases & cooling stage

This add-on broadens Caneco's reach supporting multiple languages and standards.

Grid Code Compliance Assessment is a process used to ensure that a power generation facility meets the technical requirements set by the grid operator.

Protective earthing / ground conductor sizing calculation tool

Advanced Electrical Design streamlines electrical planning into one smart platform, improving BIM workflows. It enables engineers and designers to enhance designs, reduce costs, shorten timelines, and seize new business opportunities.

An PDM add-on to manage of electrical projects created with SEE Electrical Expert or SEE Electrical

Manage electrical transaction schedules and dispatches tradings that results from the buying and selling of energy.

The ePPC interfaces with the renewable inverters, battery energy storage systems, power conditioning devices & capacitor banks.

Optimize distributed energy resource (DER) penetration and study the impacts of DERs.

ETAP Short Circuit Analysis complies with IEC 61660 standard, targeting dc auxiliary systems in power plants and substations.

Integrated SCADA with intuitive real-time visualization and analyses platform

The Cable Manager streamlines cable tasks with a user-friendly interface, to view, report, batch process, and alert calculations.

Monitor system operating capacity and dynamically calculate the system generation versus load forecast balance.

Cable pulling tension calculator using 3D graphcial layout

Arc Flash software identifies and analyzes high risk arc flash areas in AC systems.

Visualize and analyze airport power system assets using geospatial layout plans

Flexible database mapping module to transform and manipulate data between ETAP and other databases

Simulate HVDC response under steady-state and transient conditions

This module calculates the bus voltages, branch power factors, currents, and power flows throughout the electrical system.

Detailed modeling and simulation of transmission equipment for steady-state and dynamic studies

Load flow analysis and voltage drop calculations with accurate and reliable results

Turnkey SCADA solution with Open Architecture & Native Communications

VVO optimizes system voltage & vars utilizing tap changers, regulators, capacitors, inverters, etc.

Unique feature that combines unlimited system data, topology and views in one database

Time saving project management tools to record and run any desired study at any time.

Generalized connected load schedules & reports for your electrical model

All the power of Electrical CAD dedicated to industrial automation and electrical harnesses

Used in situations where major network damage is present and requires quick response

Safeguard workers and elevate Arc Flash Hazard Analysis to new heights with ArcBlok & ETAP

Visualize geospatial assest including tracks, overhead catenary system and traction substations

The Battery Discharge Analysis module simulates various scenarios, like shutdowns and emergencies, to verify the performance of an existing or sized battery.

Grid Code Compliance Assessment evaluates compliance with utility grid code requirement

Examine the effects of starting motors & load impacts within your system

Model and define characteristics for Overhead Catenary Systems (OCS), Railway Track, Traction Transformers, etc.

ETAP Unbalanced Harmonic Analysis module performs harmonic load flow and frequency scan analyses on unbalanced networks with balanced and unbalanced current/voltage harmonic sources in the network.

The ETAP AFAS product provides Real-Time and after the fact analysis of electrical faults in your electrical system. Using the ETAP digital twin combined with automatically extracted disturbance records, engineers have a clear picture of any electrical fault in the network.

Study results from the latest version of ETAP are automatically compared with results of older releases.

Optimize tie-point configuration based on multi-objective requirements

Track, alarm and schedule maintenance for field equipment based on number of operations

Calculate optimal & alternative cable sizes

etapAPI is ETAP's public-facing RESTful API. This API can be consumed from any language on any device.

Evaluate cause and effect investigations, system operations, alternative actions, and "What If" scenarios.

Solve multiple power flows and compare results at a glance

The AutoCAD OEM add-on provides a foundation for developing a robust electrical CAD engineering tool.

Simulate harmonic current and voltage sources, reduce nuisance trips, and report distortion limit violations.

Automatically adjusts parameters to match actual field measurements

Records and summarizes customer outage-related trouble call information

Current carrying capacity & sizing for low voltage power cables per French Standards

The application assisting in the assembly of electrical cabinets designed in 3D Panel software

An add-on to translate project for SEE Electrical users

Create, request and validate switching work order requests, schedules and activities

Build and customize complex machine control block diagrams and systems

Cable ampacity calculation based on ICEA / NEMA standard for cable tray installations

Unbalanced network power flow analysis & voltage drop calculations with accurate and reliable results

Graphically identify and select track routes

Module to quickly identify missing information and disabled functions of protective devices

Automatic protective device coordination & selectivity path detection tool

Intelligent analysis processes to manage the monitored data for substation level and central system evaluation.

Web-based applications and views to visualize, simulate, and manage

Define, organize and assign train consist to a train timetable

Train performance simulation program to examine the interaction between trains along a route

Evaluate the operation of Zone Selective Interlock scheme for selectivity of protective devices.

Current carrying capacity & sizing for low voltage cable installations per British Standards

Current carrying capacity & sizing for high voltage power cables per French Standards

Continuous electrical topology processing of the system for real-time conditions

Restores loads incrementally based on knowledge of process and electrical system interdependencies

An innovative software suite for the manufacturing of electrical wire harnesses

Current carrying capacity calculations for low voltage cables per IEC 60364-5-52 & IEC 60364-4-41

Seamless communication with almost any data acquisition system.

AC Control Systems Diagram and analysis.

Detailed logical layout of substation diagrams and equivalent feeder circuits

Engineering Libraries provide complete verified and validated data based on equipment manufacturer’s published data.

Time Series Unsymmetrical Unified AC & DC Power Flow

Easily design and analyze electrical distribution panel boards and load schedules.

An add-on to have access to the Electrical database of references and symbols for SEE Electrical and SEE Electrical EXPERT

Solve time varying rolling stock power demand on complex 3 phase, 1 phase, AC & DC networks

High performance distribution state estimation and non-technical loss software

Device interlocks, system optimization, control inhibits

Automates the design and documentation processes of Low-Voltage electrical installations.

Effortlessly manage and optimize your electrical digital twin with a powerful web application—unlock real-time insights, predictive maintenance, and smarter asset performance at your fingertips!

Quasi-Dynamic analysis is an option within Time-Domain Unified Load Flow Analysis.

Build a complete switching sequence plan and execute it, all in one step

Accurate multi-Domain phasor and electromagnetic transients co-simulation.

As a power plant operator, utilize ETAP Real-Time™ Model-Driven Power Plant SCADA, HMI & Predictive Analysis to answer two critical questions and get the most from each asset and avoid downtime surprises. Firstly, acquire the ability to monitor all assets, both from a production perspective intelligently and address energy production per source. Secondly, gain insight into asset health and perform preventive maintenance based on present and anticipated conditions.

A GUI base electrical tool for organizing and processing huge amounts of data

Most comprehensive unsymmetrical system fault simulation module including simultaneous faults

Sizing, & Ampacity Software for a complete analysis for subsea cable systems.

An add-on to automate electrical project translation for SEE Electrical Expert

Size harmonic filters based on a built-in filter types and configurations.

Place capacitors for voltage support and power factor correction while minimizing installation and long-term operation costs

Caneco BIM is a Revit® plugin that allows electrical information to be exchanged between a digital model and the Caneco software range.

Cable capacity and sizing calculations based on AS/NZS 3008 and cable shock protection assessment based on AS/NZS 3000.

2D/3D Digital Modeling add-on unites calculation with the digital building model in AutoCAD® or Revit.

Map Excel & Access worksheets to ETAP elements

Accurately model system disturbances and events for load shedding, fast bus transfer, critical clearing time

Data exchange between AVEVA Electrical and ETAP analysis solution

Theme, Report, Configuration & Data Managers

Intuitive, intelligent, and integrated real-time monitoring via a state-of-the-art interface.

Analyze disturbances, islanding conditions, and stability limits

Fast & convenient graphical result comparison from multiple studies built on Python™ Framework

Preserve system operation against disturbances, loss of generation, and unplanned outages.

Allocate changing generation demand of a power system amongst controllable generator units.

Embed system control logic & procedures in a sequence

Design, analyze, and size cables in underground raceway systems

User-friendly interface for creating and managing electrical grid network visualization

Determine if the magnetic fields generated by underground conductors exceed health & safety exposure limits for workers & public

Calculate the risk of a lightning strike & the probability of damage to people & property

Accurately identify the system maximum load carrying capacity limits and reactive power compensation requirements

Predict and trend system loading based on algorithms that adaptively correlate input variables like weather conditions.

Electrical Wire Interconnections System documentation (EWIS)

Complete feeder views utilizing logical layout

Detect abnormalities in the system through Intelligent Electronic Devices.

Detailed rolling stock library including locomotives, passenger wagons, freight, etc.

Evaluate system fault conditions and assess protective device ratings for direct current systems

An interface for monitoring, control and automation for substations.

Advanced Framework for Plotting & Live Charts

Simulate harmonic current and voltage sources, reduce nuisance trips, and report distortion limit violations.

Converter modeling including characteristics for controlled, uncontrolled and bi-directional operating modes.

DC Arc Flash module calculates the incident energy for direct current networks.

Predict system behavior in response to operator actions and events using real-time and archived data.

Create, model, design integrated electrical one-line diagrams in seconds.

Real-time dashboard summaries and tabulation of outage data and quality of service indices

Determine the optimal transformer turns ratio to deliver maximum reactive power output

Electrical database of equipment definitions

Evaluate technologies used to reduce power consumption and increase energy savings.

Planned outage scheduler & management system

Cable impedance calculation tool

A comprehensive PLM application for the management of electrical products

Star™ Auto-Evaluation - Automated Protection & Coordination Evaluation

Equipment modeling for electrical power distribution systems

User-Defined Dynamic Model for Alkaline Electrolyzer

Intelligent Electrical GIS interface

Monitor, supervise, control and predictive analysis using real-time network models

A data conversion tool for importing project data from ArcFM CIM XML file and generating diagram in ETAP GIS View.

Project Tracking streamlines project management by monitoring tasks, dependencies, and progress through intuitive Gantt charts, ensuring timely completion within the ETAP environment.